Superplasticity in a high strength powder aluminum

The superplastic properties of a rapidly solidified, high strength P/M Al alloy and the same alloy reinforced with SiC particulates (SiC _p ) have been studied. To prepare superplastic test materials, a matrix alloy powder of composition 7.2Zn-2.4Mg-2Cu-0.2Zr-0.12Cr-0.2Co (Kaiser PM-64) and the powder mixed with 10 to 20 vol pct SiC _p (~5 μm diameter) were thermomechanically processed to very fine equiaxed grain structures of ~6 μm and ~8 μm, respectively. Superplasticity in these materials was evaluated by characterizing (1) high temperature stability, (2) dynamic grain growth, (3) strain rate sensitivity, (4) flow stress behavior, (5) cavitation and cavitation control, and (6) total superplastic strain. It was observed that the PM-64 alloy could achieve a total elongation of over 800 pct, while the SiC_p reinforced alloy could attain an elongation greater than 500 pct before failure. Also, it was shown that with the use of hydrostatic pressure during superplastic flow, cavitation could be controlled. Observations were made of the effect SiC _p reinforcement particles had on the superplastic flow stress behavior. Interpretations are proposed to explain the role of particulates during superplastic straining.     

Thermoplastic elastomeric composition based on maleic anhydride–grafted ground rubber tire

Ground rubber tire (GRT) powder was maleated in an internal mixer using maleic anhydride and dicumyl peroxide at 160°C. Maleated GRT was characterized by using X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, wettability, and differential scanning calorimetry. The physical properties of the dynamically vulcanized 60 : 40, rubber : plastic composition based on acrylated high‐density polyethylene as the plastic phase and ethylene propylene diene rubber containing maleated GRT as the rubber phase were found to be greater than the corresponding composition containing nonmaleated GRT. The blend was found to be reprocessable, like themoplastic elastomers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 370–378, 2002; DOI 10.1002/app.10348     

Routing of a hazmat truck in the presence of weather systems

This paper focuses on the effects of weather systems on hazmat routing. We start by analyzing the effects of a weather system on a vehicle traversing a single link. This helps characterize the time-dependent attributes of a link due to movement of the weather systems. This analysis is used as a building block for the problem of finding a least risk path for hazmat transportation on a network exposed to such weather systems. Several methods are offered to solve the underlying problem, and computational results are reported. We draw two conclusions from this paper. First, it is possible to determine the time-dependent attributes for links on a network provided that some assumptions on the nature of the weather system are made. Second, heuristics can provide effective solutions for practical size problems while allowing for parking the vehicle to avoid weather system effects.     

Human erythrocytes bearing electroinserted CD4 neutralize infection in vitro by primary isolates of human immunodeficiency virus type 1

Human erythrocytes bearing electroinserted full-length CD4 (RBC-CD4) can bind and fuse with a laboratory strain of human immunodeficiency virus type 1 (HIV-1) or with T cells infected by HIV-1. Here we show that RBC-CD4 neutralize primary HIV-1 strains in an assay of cocultivation of peripheral blood mononuclear cells (PBMC) from HIV-1-infected persons with uninfected PBMC. RBC-CD4 inhibited viral p24 core antigen accumulation in these cocultures up to 10,000-fold compared with RBC alone. Viral p24 accumulation was inhibited equally well when measured in culture supernatants or in call extracts. The inhibition was dose-dependent and long-lived. Two types of recombinant CD4 tested in parallel were largely ineffective. The neutralization of primary HIV-1 by RBC-CD4 in vitro was demonstrated in PBMC cultures from 21 of a total of 23 patients tested at two independent sites. RBC-CD4 may offer a route to blocking HIV-1 infection in vivo.     

Defects in molecular beam epitaxial GaAs grown at low temperatures

We have utilized a variable energy positron beam and infrared transmission spectroscopy to study defects in GaAs epilayers grown at low temperatures (LT-GaAs) by molecular beam epitaxy. We have measured the Doppler broadening of the positron-electron annihilation gamma ray spectra as a function of positron implantation energy. From these measurements, we have obtained results for the depth profiles of Ga monovacancies in unannealed LT-GaAs and Ga monovacancies and arsenic cluster related defects in annealed LT-GaAs. We have also studied the effects of the Si impurities in annealed LT-GaAs. The infrared transmission measurements on unannealed LT-GaAs furnish a broad defect band, related to As antisites, centered at 0.370 eV below the conduction band.     

Analysis of posterior availability distributions of series and parallel systems

The lifetime distribution of an engineering system is a powerful tool for analysing the system in respect of its reliability characteristics. The analysis can be improved if the experimenter has, and is able to combine, the prior belief about the system with the operational or experimental data. Moreover, in many situations, the operational data with the complete system may either be costlier or non-existent. The problem can still be tackled by making use of such information available on the subunits or components of the system. Pursuing these concepts, the present study deals with the analysis of posterior availability distributions for a series and a parallel system. Time truncated failure and repair information and prior beliefs about the failure and repair rates of the compoents of the systems have been employed in the analysis.     

One-step oxidation of cyclohexane to adipic acid

Liquid-phase oxidation of cyclohexane with Co(III) catalyst and gaseous oxygen was found to be influenced by reaction temperature, catalyst concentration and the duration. Maximum adipic acid product selectivity (77%) with about 85% cyclohexane conversion was attained at 100°C using catalyst: cyclohexane molar ratio 0·08. Under these conditions more than 80% cyclohexane was converted in the first hour, although selectivity to adipic acid continued to increase for the next 5 h. Cyclohexyl acetate and cyclohexyl monoadipate were identified as important intermediates. This study supports the mechanism proposed by Schultz, J. G. D. and Opchenko, A., J. Org. Chem., 38 (21) (1973) 3729.